Getting started digitally with EZ-Align by DynaFlex is simple and easy. If it’s your first time submitting a scan, please contact the 3D.Ortho department at 800-489-4020 for initial setup up instructions. Setup is quick but varies depending on your scanner, anticipate anywhere from 5 to 30 minutes for initial set up.
DFT – Digital File Transfer
Use Your Intraoral Scanner to Send Files To EZ-Align
DynaFlex is able to print your scanned orthodontic case on our Rapid Prototyping Printers into a physical working model. These models are then sent into our laboratory for appliance fabrication. The model-building material is made from the highest quality available today. It is a non-toxic durable material that does not break easily like plaster and stone models. The accuracy of the model is exceptional and the appliance fit is better than EVER!
Some appliances require a bite for fabrication. If you submit your case digitally, you can also submit your bite digitally. If you are unsure if a bite is needed for a certain appliance, contact our customer care team at 800-489-4020.
Taking Your Scan
Most scanners allow you to send your scans directly to DynaFlex. If your scanner does not support this feature, you can manually export your scans directly to DynaFlex. DynaFlex can except an .stl file from any scanner.
Completing Your Prescription
Filling out your prescription has never been easier! Prescriptions are available for download HERE. Every case requires a DynaFlex prescription to be completed and submitted.
Submitting Your Case
If your case was submitted directly from your scanner, simply email your prescription to firstname.lastname@example.org. If your scanner does not have the capabilities to send the scan directly, please call and easily set up submission through our 3D.Ortho Portal.
Need instructions on sending in a bite? Click the button below to view, download or print an instructional PDF.
DMP – Digital Model Printing
Using high-speed rapid prototyping 3D printers.
There is no need to remove brackets before you take the scan! DynaFlex can easily remove brackets for you digitally. Simply check off Bracket Removal on your Rx that you submit for the case. For best results, it is important to capture ALL of the area around the bracket. Removing archwire will ensure better results.
Model Printing Options
Call For Pricing
Working Model Prints
Horseshoe or Full Palate Available
ABO Study Model Prints
Slim Base Model Prints
DMS – Digital Model Storage
Allow us to scan and store your plaster or stone models.
DynaFlex uses the most technologically advanced scanning system available to convert your impressions or models into a 3D image. With each DMS case you will receive a digital model that you can easily manipulate on your computer screen and a .pdf that contains six views of the case in a 1:1 ratio. All cases are stored forever in five different locations all meeting HIPAA standards. If your patient breaks or loses their appliance, you can order a replacement with a simple phone call.
3 Types of Digital Model Storage
Full Based Study Model
DynaFlex returns these records to you through the DynaFlex portal with a full ABO base and a printable 1:1 ratio composite PDF.
DynaFlex returns these records to you through the DynaFlex portal without any cleanup or base and printable 1:1 ratio composite PDF.
Simple Storage/Archive Scan
DynaFlex will store your scanned models without returning your records to you. If you would like the Digital version of your scan sent back to you, an additional fee will be required.